Shower tub installation considerations

If the shower can be used with a shower tub while bathing, then it is possible to enjoy it. Many urban white-collar workers like to have a bathtub installed in their homes.

After completing their day’s work, they are comfortable soaking in the bathtub.

But don’t forget that the bathtub also needs to be cleaned after the shower.

Today, built-in bathtubs are very popular and save maximum space.

This is very practical for many small bathrooms and can meet bathing requirements.

It saves space. What is the height of the bathtub? Find out together today how high a built-in bathtub is.

What is the typical height of a bathtub in centimetres

Currently, the height of a built-in bathtub is typically around 60 cm oh.

It also depends on the size of the bathroom and is determined by the specific bathroom design.

When installing a built-in bathtub, the spout at one end should be higher than the other.

Only in this way can the drainage be smooth and the shape of the downpipe is generally s-shaped to prevent back-flushing.

corner bath tub

What to pay attention to when installing a bathtub

I. In the process of installing the bathtub, waterproofing must be carried out in the slotted section.

If there are no leaks in the storage water, carry out the following work,

then connect the up and down pipes to make them smooth and build the walls using foam blocks.

Consolidation. It should also be noted that the location of the downpipe should be reserved for an access hole.

When fitting the bathtub, you can use materials such as artificial stone, mosaic and marble.

Secondly, when installing the bathtub,

it is important to know in advance that the steel bars around the installation can support the bathtub,

while the bottom of the built-in bathtub should not be supported by hard objects and will not damage the glass surface,

and four should emphasise the corners of the bottom of the built-in bathtub.

Built-in bath overflow and drain pipes should be tightly connected.

When installing tiles, inspection holes should be left for easy maintenance.

For aesthetic purposes, glue can be glued to the manhole.

How to clean the bathtub

When cleaning the bath, please remember to use a sponge or flannel.

Don’t bother using coarse cloths, steel balls, wire brushes etc.

Use a mild detergent and do not use any detergent containing particulate matter.

For stubborn stains, consider using a soft toothbrush to apply a whitening toothpaste scrub (universal toothpaste),

which is both economical and convenient.

If the pungent smell is acceptable, using the product to clean the toilet bowl works well.

I have heard that lemon vinegar, a homemade cleaner, is also good, but I haven’t tried it yet, so how do I try it?

Rinse thoroughly with water and dry with a soft cloth after each use.

One can ideally buy a branded bath.

And the height of the built-in bathtub is inseparable from the actual situation of the installation.

Choosing the right height will largely affect the comfort of using it later and avoid unnecessary troubles, so please choose carefully.

If you need to follow the bathtub, then you need to follow the above precautions in order to be able to use it properly .

But of course, the environment in the bathtub is not very good.

It can breed a lot of bacteria. Sometimes it is cleaned and looks clean on the surface.

In fact, there is still a lot of bacteria. You can always wipe the surface of the bath with boiling water.