Bathroom hand wash sink waste purchase

Buying sanitary ware is very special. Especially in the hidden areas of the bathroom hand wash sink waste, if you buy the ideal, refreshing bathroom is no longer a problem!

 

There are two types of washbasin downpourers depending on the material bathroom washbasin downpourer.

 

1,Plastic water purifier: This type of water purifier is usually made of high quality PP plastic,

which can be bent at will, has good toughness, is almost unlimited in space and is inexpensive.

 

2, stainless steel water purifier: the surface is made of stainless steel,

most of these water purifiers are made of stainless steel and ABS engineering plastic,

which has strong corrosion resistance, not easy to age, easy to install, fast and durable, long service life, etc.

The price is lower than the plastic basin. The device is slightly more expensive.

 

Structure of the washbasin dispenser.

 

The washbasin dispenser is first lifted and is marketed with flaps and pop-ups.

 

Points to note when purchasing a washbasin dispenser.

 

The choice of water purifier depends on whether the washbasin has an overflow and whether it is available with an opening.

If there is no option, you should choose a leacher without an opening.

 

Pop-ups look great, but after a while you will need to unscrew the water and scrub the dirt with detergent to ensure the water flows freely.

 

This type of water collector has disadvantages and is usually suitable for glass basins rather than ceramic ones.

As the pipe underneath the water purifier needs to overflow,

some suppliers will sell water purifiers with ceramic basins with holes punched in the glass water purifier.

With this modified water purifier,

the inlet is much shorter and if the ceramic basin is thicker and the lower clasp cannot be snapped,

then it can only be tightened with hexagonal bolts,

but when fitted it is very insecure and easily has to come loose, so it is best not to choose this type of water unit.

Bathroom washbasin downpourer installation tips

The installation of the bathroom sink waste unit is usually carried out after the basin has been installed and fixed.

The specific steps are as follows.

 

1, ensure that the basin has been installed.

 

2.unpacking the sink drainer.

 

3.attach one end of the basin drain specifically to the basin drain by screwing in the plastic head of that end.

 

4.screwing the tightened plastic head onto the basin drain.

 

5.placing the basin drain on the basin water purifier and tightening it with the pre-screwed plastic head of the water purifier.

 

6.leak test leak, if there is a leak,

the raw material belt can be wrapped around the connection between the water purifier and the water heater, then go to step 5.

 

7.There is also a brass nut followed by a rubber ring screwed to the bottom of the sink,

then the porcelain plate is placed on the sink,

which means that an apron and nut are sandwiched between the porcelain basin and the sink.

 

8.screw the nut to the bottom of the sink panel,

which means that an apron is clamped between the porcelain basin and the panel,

and the nut is located at the bottom of the sink panel.

 

Follow us for more bathroom information.