How to change the tube of free standing sink

The steps to replace the tube in a free standing sink are as follows: first screw on the angle valve to cut off the water, otherwise there will be a lot of water blocking the replacement tube when the basin is dismantled.

Then remove the basin and lightly screw the screws or waterproof adhesive at the connection between the column tube and the basin,

so that the basin and column tube are separated.

Next remove any dirt from around the sink and attach a new tube;

then apply some sealant to the gasket of the sink.

Finally return the washbasin to its original position and complete the replacement.

 

A, column washbasin replacement tube steps are as follows

 

1, screw on the angle valve, the water cut off,

otherwise in the removal of the basin will appear a large amount of running water blocking the replacement tube.

 

2, remove the basin, lightly screw the column tube and basin connection screws,

no screws in addition to the waterproof rubber layer, so that the column tube and basin separated.

 

3、Remove the dirt from around the waste water unit and attach a new pipe;

then apply some sealant to the gasket of the waste water unit.

 

4、Return the washbasin to its original position and complete the replacement.

B, what is the difference between a washbasin and a washbasin? What kinds of washbasins are there

 

1.The washbasin is only for washing hands; the washbasin is for washing both hands and face.

Residential buildings should be calculated according to washbasin,

general public office places will be calculated according to washbasin.

Hospital outpatient clinics are calculated according to washbasins;

hospital inpatient departments have to be calculated according to washbasins.

 

2, washbasin and washbasin drainage equivalent is different,

public buildings consider washbasin, residential consideration washbasin,

washbasin has a plug to consider a relatively large amount of drainage, washbasin does not have a plug,

the water directly away, light calculation, the overall impact is not significant.

Washbasin is mostly used in public buildings, only cold water pipes,

washbasin is mostly used in residential with hot and cold water pipes.

 

3, column type: column type washbasin is very suitable for the installation of space shortage of bathroom use,

its column has a good bearing force installed in the bathroom can play a very good decorative effect.

 

4, hanging: wall-mounted washbasin is also a very space-saving washbasin type,

wall-mounted washbasin as the name implies is the use of hanging in the bathroom wall installation way of washbasin.

 

5, stainless steel washbasin; stainless steel also has a prominent feature, is easy to clean,

as long as the water a flush as fresh as new. Just the colour is not too much to choose from.

 

6, glass washbasin; glass has soft lines and a unique texture and refraction effect,

both colour and style than the above two washbasins are more charming and beautiful.

But fragile and not resistant to high temperatures.

 

7, tabletop: tabletop washbasin is also divided into two kinds of basin and under the table basin.

 

The above is all about how to change the tube of the vertical column washbasin

and what is the difference between washbasin and washbasin, hope it will help you.

Want to know more related content, please continue to pay attention to WolkeSieben International.