Height of utility sink of bathroom

The normal height of a utility sink is usually between 800mm and 900mm. However, the height of the installed washbasin should be determined in conjunction with the height of the people in the home, if the average height of the family is relatively high, then the height of the washbasin can be set higher. In addition, before the installation of the washbasin, or need to determine the location of the installation, to measure the corresponding distance in advance, do a good job of marking.

 

A, what are the commonly used utility sink materials?

 

1, marble

 

Marble has a high compressive strength, hard texture, wear-resistant,

high temperature resistance, more fear of acid and alkali corrosion,

for friends who like to put some hand soap and face wash on top of the sink, is a very good choice.

 

2, quartz stone

 

In addition to the use of marble,

some people also use quartz stone as a washbasin countertop.

Quartz stone is also a very high hardness of stone,

in the hardness level quartz stone hardness can be as high as 7.5 level.

So use it as a countertop, do not worry about the countertop will appear scratches.

 

3, artificial stone

 

The use of artificial stone to create the countertop,

artificial stone is generally inorganic mineral materials and some of the auxiliary materials plus organic binders mixed

after mixing, shaping, drying, cutting, polishing and other processes processed from the stone.

Because it is artificially processed, so the plasticity of this countertop is very strong.

 

4、Tile

 

The sink tops are created by paving tiles.

The use of tile stitching can create a very artistic effect of mosaic decoration effect,

in recent years by many consumers love.

B, how to install the bathroom utility sink?

 

1, in the installation of marble washbasin,

to first install the washbasin before the marble counter top should be installed.

Installation of the countertop, should first design drawings and physical size control,

accurate and then according to the opening diagram on the countertop to draw a good opening line,

immediately along the cutting line cut the countertop,

and the marble countertop grinding, so that it remains rounded, smooth,

after the installation of the countertop can begin to install marble washbasin.

 

2, determine the position of the basin,

the marble washbasin into the cut counter panel hole, adjust the position,

along the edge of the basin on the countertop marked the outline of the basin.

After marking the contour line, remove the basin and install the taps and de-waterers required for the washbasin.

 

3, fixed marble washbasin, fixed before using glass glue on the marked contour line,

then install the marble washbasin on the countertop,

and determine the accuracy of the installation position.

Wait until the glass glue is completely dry, then connect the inlet pipe and drainage fittings.

After everything is installed, open the tap to check if there are any leakage problems around the inlet and outlet of the pipes.

 

Follow us for more bathroom basin styles.